Trade Account
Decking Calculator
Oxford Heritage 3D™ Bullnose Edge Board 2.9m
- Description
- Decking Calculator
Composite Decking Calculator
Planks needed: 0
Total Cost: £0.00
Product Description
The Oxford Heritage 3D™ Bullnose Edge Board is a step nosing and deck edging board: it gives steps and exposed deck edges a rounded, finished edge. It is the same size as our Oxford Heritage 3D™ decking — 2900 × 140 × 22 mm — and is made in all six face colours: Oak, Teak, Grey, Charcoal, Beige, Driftwood. Stocked at our yard in Didcot, Oxfordshire.
- £30.00 per board inc. VAT (October 2026)
- 2900 × 140 × 22 mm — same length, width and thickness as the deck boards
- Six colours: Oak, Teak, Grey, Charcoal, Beige, Driftwood
- Single colour per board, unlike our two-tone deck boards
- 3.6 m version on order, same price per metre
Where to use it
- Step treads: the rounded edge finishes the nosing of each step.
- Exposed deck edges, where a cut board end or the side of a board would otherwise show.
- A contrasting edge: lay the deck on one face colour and pick the bullnose in the other face colour, so each step edge is easy to see.
Choosing the colour
Each bullnose board is one colour. Pick the colour of the face you are laying for a quiet edge, or the reverse-face colour for a contrasting outline. A trim has a different profile from a deck board, so it catches the light differently — check it against your boards in your own garden light.
What else you need
Fix with the same hidden clips and starter clips as the deck. Board ends meet over a double joist, each end on its own clip. For the side of the deck, use a fascia board or an L-trim in the same colour. Full installation overview: Catalogue 01.
Technical specification
| Product code | OCW-DKBUL-290-[colour] |
|---|---|
| Size | 2900 × 140 × 22 mm |
| Colours | Oak, Teak, Grey, Charcoal, Beige, Driftwood |
| Edge | Rounded bullnose on one long edge |
| Material | Wood-plastic composite |
| For use with | Oxford Heritage 3D™ Composite Decking |
Questions
Bullnose edge board or L-trim?
A bullnose edge board is a full-size board with a rounded edge, laid as the front board of a step or the edge of the deck. An L-trim is a 50 × 50 mm angle that covers cut ends and the corner where the deck meets its side.
Does the bullnose board match the height of the deck?
Yes. It is 140 mm wide and 22 mm thick, the same as Oxford Heritage 3D™ deck boards, so it sits level with the deck.
How many bullnose boards do I need?
Measure the total length of step edges and exposed deck edges in metres, divide by 2.9 and round up. Order bullnose boards with your deck boards so they come in one delivery.
Do I need a bullnose board on every edge?
No. Use it where an edge is seen or stepped over — the front edge of the deck and the front of each step. Sides against a wall or fence can be finished with an L-trim or a fascia board in the same colour family.
All joists, trims and fixings · Catalogues (PDF) · Decking & cladding FAQ
