Trade Account
Decking Calculator
Oxford Heritage 3D™ Slatted Cladding End Board 2.5m
- Description
- Decking Calculator
Composite Decking Calculator
Planks needed: 0
Total Cost: £0.00
Product Description
The Oxford Heritage 3D™ Slatted Cladding End Board finishes the open end of a run of slatted cladding, where the panels stop against render, brickwork or a door frame. It is 2.5 m long, the length of a panel, and made in all seven slatted colours: Black, Anthracite, Teak, Yellow Cedar, Antique, Grey, Oak.
- £18.00 per length inc. VAT (October 2026)
- 2500 mm long, the length of a slatted panel
- Seven colours: Black, Anthracite, Teak, Yellow Cedar, Antique, Grey, Oak
End board, corner trim or corner profile?
- End board — where a slatted run stops on a flat wall.
- Corner trim (L-angle) — covers the panel ends on an external corner.
- Corner profile — a square profile for external corners.
All three come in the seven slatted colours. Plan trims with the battens: fix a batten where the run ends before you fit the panels.
Technical specification
| Product code | OCW-CLEND-250-[colour] |
|---|---|
| Length | 2500 mm |
| Colours | Black, Anthracite, Teak, Yellow Cedar, Antique, Grey, Oak |
| Material | Wood-plastic composite |
| For use with | Oxford Heritage 3D™ Slatted Cladding |
Questions
Where do I need an end board?
Wherever a slatted run stops on a flat wall without turning a corner — at the edge of a feature panel, beside a door or against a brick pier.
Will the end board look the same as the panels?
It comes in the same colour names, but a trim has a different profile from a panel, so it catches the light differently. Order trims with your panels and check them together.
All joists, trims and fixings · Catalogues (PDF) · Decking & cladding FAQ
